Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Light Switch 91 240 Wagon 200

Okay, so I have no brake lights working on my wagon and have tried new bulbs, cleaned all grounds and connections, tested the fuse, examined the bulb out sensor (red canister), and have come down to the brake light switch. I used the test on clean flame trap site and found that I have 12v going in (blue/red) wire but when I tested the switch by connecting to the green/red and depressing the brake, I got nothing. So I am guessing that inhave a bad switch.

I couldn't find any explanation of how to change the switch out in the Bently manual or on the web. I pulled out the instrument closeted and have the knee bolster out but I am guessing that the metal bracket must come out.

Any input on how to get this thing changednout would be greatly appreciated!

Chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Brake Light Switch 91 240 Wagon [200]
posted by  condon  on Sat Jan 22 10:17 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.