Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Change PS Pulley location - closer to pump? 200 1988

posted by  ZJZ on  Wed Jan 12 11:34 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 14:29 CST 2014
[RELATED]

I recently replaced the rack and pump on my '88 244, and found that the pulley on the new pump from the PnP is set 1-2mm forward from where it was set on the previous one. As the belts are slightly misaligned, there is occasionally squealing. Looking through the archives and FAQ shows that a puller is recommended for removing the pulley - any tips for setting it closer? Large socket and taps with a rubber mallet?

Thanks,
Zach






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Change PS Pulley location - closer to pump? [200][1988]
posted by  ZJZ subscriber  on Wed Jan 12 11:34 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.