Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

(40 brake bleeding 900

I replaced the front brake pads,calipers,and brake hoses and having a problem getting a firm pedal. When I took the hoses off the fluid level dropped to just below the min. mark. Do the rear have to be bled also? The master brake cylinder has 2 brake bleeders on it and is there anything that has to be bled with these? I never saw bleeder nipples on a master brake cyl. I have never had an issue bleeding brakes like this,kinda embarrassing. The car is a 1993 940 SW with ABS. Thanks in advance. Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New (40 brake bleeding [900]
posted by  someone claiming to be Grassman  on Mon Dec 20 12:43 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.