Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS Light 200 1993

posted by  fpeck1948 on  Mon Dec 20 09:52 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 27 08:46 CST 2013
[RELATED]

Started the car today and the ABS light is on.

I looked at the FAQ's on here to check using the below instructions:

Key to position II

Quote: Look under the hood to locate the Diagnostic Link Connector boxes. Your car can have one box ("A") or two ("A" and "B", 1992+). The "A" box has the diagnostic connector pigtail, the test button, and the LED readout lamp.

Put the Diagnostic Link Connector probe into Box A, Position 3. Push button on DLC for >1sec. and capture codes flashing in the red lamp.

I put the pigtail in position 3 and pressed button for one second, but no inidcator light came back showing any flashing code whatsoever.

Am I doing something wrong to check this problem?

Thanks
Frank





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS Light [200][1993]
posted by  fpeck1948 subscriber  on Mon Dec 20 09:52 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.