Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wrong wire on the tach killed my ignition system 200 1984

Hey everyone.

I was on the board a while ago and was told that the red/white-striped wire should be connected to the tach on my 84 244DL. I connected it instead of the black wire that had been connected to my tach and after driving it for one day, the entire ignition system shut off. No spark no matter what.
I switched the wire from the red/white striped wire back to the black wire, and the car fired up immediately.
I took the cluster out in the dark (stupidly), so I didn't know which wire was originally connected.

Just wanted to share my experience and let people know that on the 84, the black wire is for the tach, not the red/white wire. Maybe there was a change after 84? Or maybe this car's wiring is as wacky as my 740's ;) I hope not. I would just edit or reply to my original thread, but it's been locked now.

Happy Bricking!
--
1990 740 Turbo, on its way to stock specs, maybe beyond






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wrong wire on the tach killed my ignition system [200][1984]
posted by  Will740turbo subscriber  on Mon Dec 6 13:34 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.