Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Piston retractor for our Stationary Calipers

posted by  TONY H on  Wed Oct 27 06:42 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 16:39 CST 2014
[RELATED]

http://www.diseno-art.com/products/tools/brake_piston_retraction_tool.html

Has anyone used a tool like this for their Volvo? I know I always slide the old pads out a bit and squeese them with pliers to retract them.
Motorcycles have the same multi Piston configuration and I was looking at a nicer way then Pliers to compress the pistons. It's tough to get pliers in there so I end up pulling the caliper off and fighting with it.
Any other recommended tool for multi piston Calipers??
I did Brakes on the Bike last night and it reminded me that I need a better way.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Piston retractor for our Stationary Calipers
posted by  TONY H subscriber  on Wed Oct 27 06:42 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.