Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

2/3 wire connector for Turn Signal assembly 200 1992

posted by  Birdfarmer on  Sun Oct 17 07:35 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 1 15:32 CST 2014
[RELATED]

Started replacing the head lights with the DJ Auto E-codes. Fairly easy to do but I noticed that the PO had taken out the gray 2 wire connector that is used for the Drivers side Turn signal assembly - so I'm having to splice it temporarily.

I'd like to replace it with the "correct" part so it will match up with my left side - - anyone know the proper name (and volvo Part number)???

note - the DJs have a 3 wire setup - White / Brow / Green. I'm assuming the Brown is for Daytime Running lights - any problem with splicing it with the White (especially since I leave my headlights on all the time anyway??


Thanks
Charles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2/3 wire connector for Turn Signal assembly [200][1992]
posted by  Birdfarmer  on Sun Oct 17 07:35 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.