Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 Odometer resoldering - fail? 200

uid 29404's pic
posted by  punk240 on  Thu Oct 7 11:47 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

I finally got around to taking the advice of some of the brickers that the 92 VDO Odo PCB soldering was CRAP.
I meticulously sucked the old solder off and put some new stuff on. Some connections that were originally doused with solder I skipped. After I reinstalled the whole sha'bang no roll. I did notice that there is a smaller PCB attached to the Odo PCB with MUCH smaller parts. Is that one ever a problem or is the shoddy work just on the Odo PCB?
I'm now open for ideas...

Tim
--
'92 244 w/ M47 (Hydra, ipd bars and springs, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1992 Odometer resoldering - fail? [200]
posted by  punk240  on Thu Oct 7 11:47 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.