Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2022 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

water leak from where the wiring harness goes throught the driver door frame 700 1991

posted by  eyyu on  Mon Sep 27 12:59 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 8 14:16 CST 2014
[RELATED]

Now my 91 745T is almost water tight, except a small leak at the driver's side door. I pin-pointed the leak to the white plastic cup thing above the driver's left foot area right next to the infamous leaky plug (the big square plastic plug for the vent hole). When I leave the gardening hose fully running into the cowl, there is water accumulating inside cup, not along the outer seal. I couldn't figure out how the rubber grummet on the outside of the door frame is connected to this white plastic cup inside to let the wiring harness go through. Did anyone ever take it apart? I'd like to take it apart and understand how it was leaking. Please advise. Thanks. Erwin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New water leak from where the wiring harness goes throught the driver door frame [700][1991]
posted by  eyyu  on Mon Sep 27 12:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.