Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any tricks for a stuck trans fluid line nut? 900

posted by  huskerdooo on  Sat Sep 25 12:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 19 09:15 CST 2013
[RELATED]

Hi all,

I am having an issue breaking the nut free on the transmission line going into my 960 radiator. I tired the trick of squeezing 2 wrenches together and I had squirted the thing for a week prior with PB Blaster. (like the FAQS suggest)

Anyone know of another trick? I can't budge it and I am slowly ruining the line with a little twist action. I am using a 17 mm flare nut wrench on it along with a one inch open ended wrench.

I was wondering what the worst case result is.. If I twist the end of the line, can it be mended in any way? I believe someone mentioned they put a rubber tube in-line as a fix. If this happens to me, I am worried that there will not be enough tube on the radiator side to splice in a rubber tube. Is this a stabdard tube that I could get a small peice of?

Any suggestions are very appreciated, Thank you

Seth






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any tricks for a stuck trans fluid line nut? [900]
posted by  huskerdooo  on Sat Sep 25 12:49 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.