Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Blower Motor replacement - How long does it really take and other questions. 200 1990

posted by  Mark Lundell on  Sat Sep 11 18:28 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 14 21:34 CST 2014
[RELATED]

Bearing is squealing so its time to replace the motor. How long should it really take me? I've read the Chainsaw method, the modified chainsaw method, and the hole-saw method. Why does the Bentley manual not refer to cutting out the venturi? Are the later 240 models designed so that the venturi need not be cut? If I choose to use the no-cut method, what is the best way to get at ducts coming off the upper portion of the blower box?

Thanks for your assistance before I begin this task.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heater Blower Motor replacement - How long does it really take and other questions. [200][1990]
posted by  Mark Lundell  on Sat Sep 11 18:28 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.