My odometer stopped working last week, and I was able to get a gear and replace it before I lost too many miles (about 300 according to my GPS)
I did the gear replacement last night with no problems, but wanted to ask a question about one of the connections to the board.
The connectors (half moon, etc.) nearest the passenger side of the car are straight forward, and the one that plugs in the board is clear.
Beside it though, there is a 2 pronged connection, but the connector that goes to that one only has one prong. Is there something that should be plugged into the other side? I've been in there many times before working on the clock, changing bulbs, etc. and I have always wondered about that connection.
Any help you could give me would be appreciated. I took a good picture of it, but can't seem to post it today.
Dow
|