Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

running rich and check engine light - where to go from here? 200

posted by  Swedespeed240 on  Thu Jun 24 02:47 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 26 10:13 CST 2012
[RELATED]

I got codes 2-2-1, 1-1-3, 2-3-1 and I think I need to look at the o2 sensor and/or AMM.

two questions - When checking the o2 sensor, do I measure resistance on the green wire or the 2-pin connector?

When checking AMM, I should find zero ohms at pin 1 (indicating good ground).
WHen checking voltage, where should I be?

car runs pretty well, all things considered - definitely rich but plugs show carbon, but nothing overly sooty.

thanks.
--
Spencer 1992 244 200K : Bosch LH 2.4 Jetronic FI






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New running rich and check engine light - where to go from here? [200]
posted by  Swedespeed240  on Thu Jun 24 02:47 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.