Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do NOT use polyurethane bushing for swaybar 700 1986

posted by  raidman on  Fri Jun 4 15:28 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Upon noticing a clunk-clunk sound after going over dips, I decided to inspect the suspension. found that the poly bushings I thought were going to last forever were toast on passenger side and completely gone on driver's side. Had to go to PNP to get a good used aluminum control arm due to the groove worn by the steel bushing holder. I'm going back to the normal rubber ones with an integrated washer.
Sometimes old school is best.

el raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do NOT use polyurethane bushing for swaybar [700][1986]
posted by  raidman  on Fri Jun 4 15:28 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.