Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

coolant leak 200 1988

posted by  42 on  Thu May 13 03:57 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 22:13 CST 2014
[RELATED]

I just noticed that my 240 with an auto trans is leaking coolant where the top transmission cooling line enters the right-hand side of the radiator. I was able to loosen the nut on the radiator very easily with my bare hands, so I cleaned the washer and the area up, and retightened the nut. However, it won't seal up - coolant still leaks regardless of how loose or tight I have the nut. I don't want to crank it down too tight, as the side of the radiator is plastic. Should I use a sealant on it? And if so, what sort of sealant (silicone?). Or do I need a new radiator? -- the present one is less than 5 years old.

Thanks!
David






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New coolant leak [200][1988]
posted by  42  on Thu May 13 03:57 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.