Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help with transmission line on 960 900

posted by  lightbulbguy on  Fri Feb 19 11:25 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 16 15:17 CST 2012
[RELATED]

I'm in the process of replacing my radiator and i'm having a hard time with the lower transmission cooler line. I used two wrenches to try and remove it. I have the line loosened from the brass fitting on the radiator but my problem is the nut on the line itself wont turn. The last time i did this i ended up kinking the line and had to replace the entire length of the lower line. I'm trying to avoid that again. any tricks to breakining it free? I'm soaking it with PB Blaster right now and will probably wait until tomorrow to attempt again.
any suggestions would be greatly appreciated. The car is a 1996 960.

Neil Noonan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help with transmission line on 960 [900]
posted by  lightbulbguy  on Fri Feb 19 11:25 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.