Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

91' 240 brake light right side 200 1991

posted by  bbuhlman on  Sun Jan 24 16:39 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 27 21:18 CST 2014
[RELATED]

Hi All,
I wondering if the cause of my issue is the flexable ciruit board on the right side. I have center brake and left side brake and running lights and 12 volts to the flex circuit board on the right with my tester. I do not have right side running light either. I am testing with a volt meter between the flex board and ground screw. The socket and bulb is fine, it works in the left side when I swap them. I am guessing the area where the socket twists in on the right side is not making connection with the flex board but it seems to be it should light if its partially twisted in, not over the worn spot but it doesn't. I do have a dash lamp warning light lit. Is the flex circuit board the likely cause?

Thanks,
Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 91' 240 brake light right side [200][1991]
posted by  bbuhlman  on Sun Jan 24 16:39 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.