Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2021 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Clunk in front end - 1997 S90/960 900 1997

Volvo made both the 960 and S90 in 1997, so I’m never quite sure where to post my questions because I don’t know if the 1997 960 and the 1997 S90 are exactly the same mechanically or almost the same or what. So I’m posting this problem in both the 960 and S90 sections.

Our 1997 S90 has developed a clunk in the front end when we hit small bumps in the road. It sounds like my 240 did when one of the rear A-arm bushings was bad. Any particular things tend to go out first on these cars? I’m thinking A-arm bushings, ball joints, strut tower connections under the hood, maybe tie rods. The car only has 103k on it and looks like it was well cared for. Would the information in the 700/900 FAQ section apply to a 97 S90?? Does anyone have any suggestions?
--
Thanks for all the help. DougC ::::: 1981 242, IPD bars and Turbo wheels, M46:::::::1984 760, B23FT, M46, waiting to donate engine to 242:::::::1997 S90






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clunk in front end - 1997 S90/960 [900][1997]
posted by  DougC  on Fri Jan 22 14:31 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.