Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No Power Under Load OBD Codes: 1-2-1 1-3-1 2-1-2 + 1-4-4 2-1-4 2-2-4 200

posted by  MrNabisco on  Thu Jan 21 04:19 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 12:36 CST 2014
[RELATED]

My brick just lost all power under load.

Was on the highway when problem occurred. Car runs but as soon as a load is applied to engine it sputters and dies. I was able to limp home at low load and RPM on side streets.

Retrieved the following OBD codes.

#2 socket: 1-2-1 1-3-1 2-1-1

#6 socket: 1-4-4 2-1-4 2-2-4

Crazy amount of codes!

No AMM signal?
No RPM signal?
No O2 sensor signal?

Not sure how I could loose all those signals...

Am searching Brickboard info and trying to see where this info leads.

FYI: New AMM and O2 sensor. Cleaned injectors and most every relay changed. No blatant issues that I know of.

Thanks for any suggestions.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No Power Under Load OBD Codes: 1-2-1 1-3-1 2-1-2 + 1-4-4 2-1-4 2-2-4 [200]
posted by  MrNabisco  on Thu Jan 21 04:19 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.