Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

LED Cluster conversion 90% finished 200

uid 29404's pic
posted by  punk240 on  Wed Nov 4 11:45 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

I've mounted a 9 bulb strip of LED's to supplement the crappy lighting in the cluster. I was using a 1987 cluster as a model to experiment with and the power source coming from the 13mm two-piece bulb for the original lights that light up the cluster. Now I am trying to mount the facia of the 1987 cluster to my car which is a 1992 cluster... I'm finding that my plan is back-firing cuz the 1992 cluster uses a 10mm one-piece halogen bulb of which i cannot diassemble. I've read and confirmed that the bulb sockets for the circuit board are not the same diameter.... Scraping the power source...

Anyone know of a power source on the circuit board I could tap into?

Cluster #K40168

My last resort is to use a longer wire to attach to the light dimmer... But i really wanna keep the modulation of the cluster for in case I remove it again.
Any ideas?

Tim
--
'92 244 NOW w/ M47 (Hydra, turbo bars, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New LED Cluster conversion 90% finished [200]
posted by  punk240  on Wed Nov 4 11:45 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.