1997 960 Wagon
A couple of years ago, I lost use of my keyless entry. Both remotes did nothing, changed batteries, checked fuses all good. Everything worked except the remote.
Maybe I am inventing the wheel again but, I came across this tidbit, and it worked. Apparently you have to reprogram the receiver module. This is done by:
1.Turning the key to position I or II five (5) times in ten (10) seconds.
2. Then leaving the ignition on (not started) Press either LOCK or UNLOCK on the REMOTE within thirty (30) seconds.
3. Turn ignition off.
It worked for me, I was truly amazed!!!
I hope this helps.
|