Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M47 on the way out? 200

uid 29404's pic
posted by  punk240 on  Fri Sep 25 09:04 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 14 15:23 CST 2014
[RELATED]

In the past few weeks I've noticed it's increasingly harder to put the car in first gear... almost a gummy, plastic feeling. Second gear is vaguely mimicking the effect. Conversly 5th is exhibiting some similar sypmtoms. Best I can describe is that it feels like a bushing is not allowing me to precisely put it into gear at lateral extemes. The shift rod bushings are about 3 years old and previously I have removed the bolts holding the shifter boot (to monitor the crappy URO Flex Disc) and the bushings have no play... I'm dreading a synchro issue...

On an ancillary note, Reverse has to be grinded to get into gear... This was a normal occurance, but it, too, has gotten worse... and loud.

All of this is exacerbated when the car is hot.

Thanks to all
TIm

_______(edit)_______
P.S. I will performing the "To adjust reverse gear detent" as described in the Bentley (p.430-3) this weekend to see if this has any effect.
--
'92 244 NOW w/ M47 (Hydra, turbo bars, bilstein, urethane bushings)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M47 on the way out? [200]
posted by  punk240  on Fri Sep 25 09:04 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.