Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

strut housing disaster 900

posted by  petemosss on  Thu Sep 17 09:42 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 23 13:20 CST 2010
[RELATED]

I installed a new KYB cart,rubber bushings and bellows in the strut housing and then hung it from from the 2 bearing mount nuts. As I was bolting ball joint to bottom of tube the bolt snapped off. Upon inspection the threads in the other hole were bad too. I knew they came out hard but the old bolt threads look fine so i never checked arm. I know there is no way it's coming out after a 3' bar was involved and then I still have 2 bad threads so it's time for the Men's Mall (boneyard)

I have a 1995 940 turbo wagon. Will any 740 or 940 strut tube work?

Thanks! Pete






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New strut housing disaster [900]
posted by  petemosss  on Thu Sep 17 09:42 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.