I have a 95 940 8 valve with 89k on it and noticed that the tranny mount was shot. I changed the mount with a cheap aftermarket one and partially flushed the transmission . Now the car has morning sickness- the transmission will not shift out of first until it warms up between 7 and 10 minutes. After that it runs fine in all gears. I did notice that the jack that I had under the pan did sag about 3 inches while I was changing the mount and now the tranny sits up about 5/8ths of an inch higher because if the new mount. Is it something that I did? Could it affect the linkage or the governor or is it just plain bad luck? I am stumped. Any and all suggestions will be greatly appreciated. Thanks! Joe
|