Inga's rear wiper quit working about a month or so back. Decided to take a swipe at fixing it today. The other two times it was the hinge harness so I looked there first and this time it is not the wiring.

Hayes has nothing I could find on 245 wipers in it. The green manuals have nothing, at least the few I have nothing. Never got around to ordering that microscope so I could try and read the Bentley. Did look but so far found nothing there either.

Can someone give me the location of the relay, and a description of how it all should work? I was going to run 12 volts to the wiper pins to see if the motor would run or not. But before I hook up wires want to know what wire does what on the motor.

No voltage on either of the two wiper wires at all by the way at the motor or on the four pin plug, that I did check.

Any help would be greatly appreciated.

Thanks and Regards,

Paul