Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Kickdown cable question 900

posted by  olyh01 on  Sun Aug 30 15:24 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jul 12 09:22 CST 2013
[RELATED]

My son's 1993 940T tends to shift down between 40 and 55 with just a hint of gas. The kickdown cable adjustment nut is is almost at the ferrule (max slack; see picture at http://tinyurl.com/ksz76c). The cable sheath is a bit loose but stays in the ferrule. I could not hear the thunk frmm the transmission side (per FAQ procedure.)

I suspect the cable was not properly installed.

Question: Is it possible to push the cable into its recess without removing the filler tube?

Much TIA

Lih-Yen







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Kickdown cable question [900]
posted by  olyh01  on Sun Aug 30 15:24 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.