Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Bleeding Question Non ABS 200

posted by  dobber13 on  Thu Aug 20 15:05 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

I have a 85 244ti and installed a new master brake cylinder.I bled the MBC before installing and used the Power Bleeder to take out any air from the system.The peddle is a little soft,I thought I removed all the air in the system.So when using the Power Bleeder is it possible that air is left in the MBS because you don't move the piston like if you where bleeding the system the old way?Now I'm 2nd guessing the method of power bleeding.Is it a concern and should I bleed the brakes the old way? Thanks,Charlie






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Bleeding Question Non ABS [200]
posted by  dobber13 subscriber  on Thu Aug 20 15:05 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.