Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No.1 fuse 700 1989

posted by  Joebrick on  Thu Jun 18 07:28 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Aug 25 02:53 CST 2009
[RELATED]

I have an 89 740GL with a very badly burnt No.1 spade fuse holder. I would like to install an in-line fuse holder for this paticular fuse. Problem I have is that there are three wires at the back of this location.

Has anyone done a remote "holder" at this fuse and if so, which wires did you pick to run to the new fuse holder? One connection runs to the FI relay, one is incoming hot and the other I can't tell.

This sure would be simpler than replacing the whole fuse block....too bad it's not two wires behind that fuse.

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No.1 fuse [700][1989]
posted by  Joebrick  on Thu Jun 18 07:28 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.