Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2011 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Euro sidemarkers S90-V90

1998 S90. Trying to fish wires to connect the sidemarkers to the turn signal wires. I did this on my dtr's 940 without much difficulty by following the FAQ procedure, but no luck on this S90. Starting from an inner fender hole behind the (removed) air filter housing, I can feed more than enough coathanger wire to get to the hole in the outer fender formerly occupied by the "Volvo" emblem, but it never appears there. I can hear and feel it rattling around close to the emblem hole. I've repeated a lot of times, trying to curve and orient the fish wire differently. Seems to be some sort of divider or bulkhead which blocks the fish wire away from the emblem hole.

...anybody got the right way to go about this? TIA!
--
Bob (son's 81-244GL B21F-M46, dtr's 94-940 B230FD, my 83-244DL B23F-M46, 89-745(LT1 V8), 98-S90, 77MGB and four old motorcycles)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Euro sidemarkers [S90-V90]
posted by  Volvodad subscriber  on Sun May 31 10:49 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.