Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Swapping out a fender. 200 1989

posted by  tourtelot on  Fri May 8 14:17 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Dec 21 20:23 CST 2011
[RELATED]

I have a pretty bunged up driver's side fender. I just got a nice one today from the wrecking yard. I have found the correct paint and clearcoat, some 600 grit sandpaper and I will soon ave a nice silver fender to match my car. But there is a trim-strip on the bottom of the panel that is held on with some sort of butyl tape, about 2" wide or so and about 10" long. I will salvage the strip from the old fender but where can I find the correct tape to put it on the new fender?

Thanks.

D.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping out a fender. [200][1989]
posted by  tourtelot  on Fri May 8 14:17 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.