Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Nylon Antenna Mast Gear Feed Problem 900

posted by  someone claiming to be 960 Brickster on  Tue Mar 31 01:27 CST 2009 [RELATED]

I am having a tough time getting the power antenna to grab the nylon toothed gear line after replacing the antenna and mast. I understand the teeth are to face the front, but it does not seem to take. With the teeth facing the rear the nylon cable was chewed a bit on the internal gears, but did not grab. The FAQ says gear to the front is right. How far down do I need to feed the antenna before it should grab? This should be easy, so ideas appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Nylon Antenna Mast Gear Feed Problem [900]
posted by  someone claiming to be 960 Brickster  on Tue Mar 31 01:27 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.