Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2018 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 tail light identification 200

Stopped by the Pick and Pull this week and found this set of tail lights on a 1983 240 coupe. It had died due to rust apparently.

Photobucket

A quick look at the internet using the Bosch part number came up with 1979 as the most common year. It was also listed as fitting up to 1983. Can anyone enlighten me as to what years it was originally fitted on? The attachment pattern is the same as the later 240's so there does not seem to be any reason for them not to fit any 240 (they would just leave a larger space in the area where the rear license plate is mounted.

They are in great shape and the metal "circuitry" certainly would be better than the later designed printed board.

One of them has two of the mounting studs broken off. I was thinking that perhaps those could be ground flat, carefully drilled and tapped to accept new studs. Any other ideas for a repair??

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 tail light identification [200]
posted by  rstarkie subscriber  on Sun Mar 29 05:59 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.