Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing clips to hold the pet barrier cage 200 1993

uid 44629's pic
posted by  Luke H on  Tue Nov 25 05:31 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Mar 20 10:54 CST 2009
[RELATED]

I splurged on ebay to purchase the OEM Volvo pet barrier cage thing last week. My 850 has one, so I can't live without it now.

I installed the top brackets by poking holes in the headliner and bolting them on. The cage hangs down just dandy. It's even bent in a manner to fit around the rear seat headrests in the '91+ wagons.

However, it seems to hang high enough that I won't be able to screw the clips into the back of the seat, that hold the bottom of the cage tight, in a manner which will allow it to work right.

Do any of you have photos of the orientation of the metal clips screwed into the back of your seat? I want to do it correctly. I didn't know if earlier model 245s had slightly taller rear seats or what.

Thanks much!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.