Hey, All. I posted this previously with two other Volvo items I had available for sale. The 'F' head sold and so did the '65 122 wagon.

I still have the early '70s B20 short block available for sale.

It is a short block only - so basically the block and it's guts. The cylinders were bored .015" over and lightly used Mahle pistons were installed. There is no wear ridge on any of the cylinder walls. New rings were installed. The rods were all balanced. The crank and rod bearings were all lightly used. Everything was checked and was within spec at time of assembly. The block was recently stripped of it's old paint down to bare iron. The block was primed and painted red with high quality primer and paint. Because of some of the lightly used parts I consider this engine to have undergone the same use as one that has approximately 15k miles on it. This engine is tight, balanced, and ready to bolt parts to. I paid $500 for this assembly before I stripped it and painted it, and I'd like to try to get that $500 back. I'm flexible, though, because I don't want this thing in my garage forever. Currently on an engine stand in my garage in Annapolis, MD.

Please e-mail me through Brickboard messaging if interested.

Thanks!

Deluxe