Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ignition control unit 200 1988

posted by  vrollvo on  Mon Jul 28 16:02 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 04:13 CST 2014
[RELATED]

'88 240/M47: IN the Bentley book there are many warnings, some of which I have repeatedly disregarded years ago, before I ever had a Bentley manual. The latest being, with the under hood ignition control unit, "don't pull the multi pronged connector out of its position, you will damage one way pin connectors"????? I've never seen or heard of a one way pin connector.

Being curious, I dug out a spare which had wiring connected from a quick snip removal. And, you guessed it, the electrical multi prong connector pulled right out, swathed in protective grease. The prongs looked like the straight push type. I could see no reason how they could possibly be damaged or why such a warning would be issued??? Anyone??? What am I missing?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ignition control unit [200][1988]
posted by  vrollvo  on Mon Jul 28 16:02 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.