Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing blower motor - tested - no function pos. 1 & 2?? 200 1990

posted by  Strackerjack on  Mon Jun 2 04:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 19:11 CST 2014
[RELATED]

I'm using the dashboard removal method to get at the blower and doing complete R&R of Dashboard, Blower, Heat Adjuster Valve, Stereo, and maybe the cruise control (which I think is in there somewhere).

so I got down to the blower and put the new one in, new resistor, new switch turned it on and I only got blower function in positions 3 & 4?

nothing on 1 & 2, I'm gonna check to see if those positions are getting power after the switch, and I might try putting the old resistor back in...

but I thought I'd check here to see if anyone had any thoughts on what might be going on...

thanks!

jack
--
Bad Blue - '86 245 with 303,000 mi., Blacky - '91 740 wagon with 180,000 mi., Mean Green - '94 850 with 222,000






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing blower motor - tested - no function pos. 1 & 2?? [200][1990]
posted by  Strackerjack subscriber  on Mon Jun 2 04:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.