Good morning fellow Bricksters! The newly acquired 1992 240 wagon is giving me fits! I bought some used tested window switches intent on replacing the ones in the wagon that were shaky. I tested all the replacements and they all worked. But when I tried to roll the passenger rear door window up and down, nothing happened from the drivers control pad, and I could only get it to roll down from the door switch. I have plugged in all the replacement switches with the same result (even thought they work fine in all other windows. I then took the motor out of the door, and lubed the mechanism. The motor works find spinning clockwise and when I disconnect the wires and reverse the red and black wires, it will spin counter clockwise when the switch is pressed in the 'down' position but do nothing in the up position. Do I have a short in the switch to harness plug? anyone had this issue before? any help would be greatly appreciated! Thanks in advance. Greg

1993 240 Sedan 138.000
1992 240 Wagon, 140,000- new to the family