Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Big bore B20 (2.2 liter) emissions help 120-130

The plus side to leaving Alaska is year round motoring, the down side is now I have state emissions to pass for the first time.

Help please. I have been able to pass the driving portion (25mph for 3 minutes) with plenty to spare, but the idle test keeps failing 4 times and counting. I have not been able to get the CO2 below 1090 ppm at idle. Arizona state law is 500 ppm or less.

The engine= b20 overbored 2.2 liter IPD big bore kit with Isky torque cam, FI head with high compression, SU carbs with matched needles and high flow air filters, header into 2.5 inch free flow exhaust, Crane electronic ignition, stock coil, 165f thermostat, custom triple core radiator.

I have tuned the engine to spec, set the valves at .016 (yeah I know its a bit tight, but I'm getting desperate),tried running at high speed to clean it out, leaned it out way out, jacked the idle to 1500 rpm, questioned the accuracy of the emissions machine...

What else am I missing? any thoughts? I need to pass this before I can finish the air conditioning install.

Thanks in advance for your expertise and assistance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Big bore B20 (2.2 liter) emissions help [120-130]
posted by  someone claiming to be Erik  on Mon May 5 16:03 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.