Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do the Bosch and NGK oxygen sensors have the same connectors? 700 1990

posted by  JPaganel on  Wed Apr 23 17:21 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 26 18:07 CST 2012
[RELATED]

I have a Regina car and there is a code set for bad Oxy sensor. Measuring the sensor voltage gave super low readings, far outside of operating range.

Today, during an oil change, I looked at my exhaust. The downpipe has been replaced and the sensor looks shiny, like it has been replaced with it. It would be a little odd to have a newer sensor go, but it's possible the previous owners mechanic, not knowing the difference, could have used the wrong sensor, especially if they have the same connectors.

Also, how is the downpipe supposed to be mounted? Mine has a block with a threaded hole on it, but it s attached to something with a hose clamp and the block is not used.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do the Bosch and NGK oxygen sensors have the same connectors? [700][1990]
posted by  JPaganel  on Wed Apr 23 17:21 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.