Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2021 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

SU Fuel line to jet 120-130 1965

posted by  jjai on  Sat Mar 29 19:35 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Nov 19 20:24 CST 2010
[RELATED]

I just picked up a '65 122S two weeks ago, and am having a blast working on it, which is good, since it's going to need a lot of work! I've already found Brickboard to be incredibly helpful.

Today, while I was fumbling around the carbs, I knocked one of the fuel lines out of the jets. (Dripping fuel on to the still-warm exhaust manifold. Not good.)

I imagine the fuel line is supposed to be connected solidly to the bottom of the jet assembly. I found a great post on how to attach the fuel line on the float side here:
http://www.brickboard.com/RWD/volvo/1053100/444-544/su_fuel_feed_line_problem.html

But I couldn't figure out how it's supposed to be secured on the jet side. I feel like I'm missing something obvious... I'd really appreciate it if someone could describe how the fuel line is supposed to be attached to the jet assembly.

Thanks!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New SU Fuel line to jet [120-130][1965]
posted by  jjai  on Sat Mar 29 19:35 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.