Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Choke Adjustment 140-160

I have a newly installed set of HS6 SU carbs.

My choke cable is set up in such a way so that the choke cable moves the jets as soon as the knob is pulled from the dash. While the engine starts rather quickly, this does result in a rich mixture that eventually bogs the engine down--even when cold. What's more, I have to keep the gas pedal depressed until the car warms up because if the choke is pulled from the dash, however slightly, the engine runs too rich.

How do I adjust the choke cable so as to make the choke lever push up against the fast-idle screw BEFORE lowering the jets to enrich the mixture? In other words, is it possible for the first 1/2" of the choke knob to increase the idle speed without enrichening the mixture?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Choke Adjustment [140-160]
posted by  62P1800  on Tue Mar 11 05:52 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.