Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2017 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clarification Please! 1988 760 B230FT 700 1988

posted by  essjayarr on  Wed Feb 27 13:58 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 21 12:59 CST 2009
[RELATED]

Troubleshooting my hall sensor wiring.
Terminal 1 black to ground is with ignition on also?
I get 16 ohms with ignition on and 0 ohms with ignition off.
Also I'm getting 6.1v at terminal 2 to ground.


Following is from 700 FAQ page.
at EZK Hall sensor wiring:
Terminal 3 (red) & Ground 12V w/ ignition on
Terminal 2 (blue) & Ground 5V w/ ignition on
Terminal 1 (black) & Ground 0 ohms
















<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.