Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AMM and/or 'pre'-pump and/or flame trap 200 1991

posted by  rodvt on  Mon Oct 29 08:36 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 28 11:21 CST 2014
[RELATED]

Hi I am a bit anxious that I have already 'posted' but it is not showing up...

I have just had my '91 245 'check engine light' on + fuel pump noise, and general 'not feeling right' long crank/hard to start diagnosed as:
1) The 'pre-pump' needs replacing ($500.++)
2) The AMM may have been triggered by 1) (above)
3 Maybe a screwy O2 sensor.

The [cheap] solution was to reset the light and keep the tank full (not as easy as it sounds).

I want to know
A) Do people have good experiences with the rebuilt AMMs from IPD?
B) Can I realistically do the pre-pump part myself? (what tools do I need?
C) How does the flame trap relate (some posts here suggest a connection).

Thanks,

Rod

(I always seem to be driving up or down hill, exacerbating the tank problem)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM and/or 'pre'-pump and/or flame trap [200][1991]
posted by  rodvt  on Mon Oct 29 08:36 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.