Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

question on automatic trans. 200 1990

posted by  mush on  Tue Sep 25 01:32 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 31 10:29 CST 2013
[RELATED]

hello bricksters, i am trying to find out why the auto trans. shifts with a clunk and a bang when put in drive ,it does not happen going into reverse or park. the trans . was rebuilt and the shop said the problem was that the idle speed was too high. and that was true and caused by the gasket on the intake manifold that was old cracked and brittle, once it was changed the idle dropprd down to 900 rpm and sounded normal but the trans still is not right ,any ideas?? thanks for any input Mush from mushroom land






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New question on automatic trans. [200][1990]
posted by  mush subscriber  on Tue Sep 25 01:32 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.