Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wiring to main fuel pump 200 1983

posted by  jdm on  Mon Sep 17 03:40 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 6 11:42 CST 2014
[RELATED]

I just finished replacing the main fuel pump and accumulator on the '83. Aside from the normal rust/corrosion issues job went well. One issue, the insulation on both wires to the fuel pump had crumbled. I wrapped both wires with electrical tape and put a piece of heat-shrink tube over the taped wires and sealed the ends of the tubing with RTV, this is working for now. I noted that the fuel pump wiring passes through a grommet on the underside of the car. Does this plug into the wiring harness and can a replacement be ordered or am I looking at having to splice good wire in (I consider the current repair temporary). Thanks in advance.

John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wiring to main fuel pump [200][1983]
posted by  jdm subscriber  on Mon Sep 17 03:40 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.