Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Replacing a cross-member 700 1989

posted by  NativeJesus on  Sun Jul 15 05:34 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 18 06:23 CST 2007
[RELATED]

Hi (I'm a n00b here), I'm the proud owner of a quite-rust-ridden 1989 760 turbo intercooler sedan. I consider buying a totally identical, almost rust-free car (we're in Canada so no car is totally rust-free) with loads of new parts to help my restoration.
Now to the point, the said car had an accident which damaged the cross-member. I'm not an expert, but after a good look under the front end of the car, I think I can manage to salvage my cross-member and bolt it on the other frame.
The problem is, I can certainly do it if I have the good part in mind. I have not seen the other car yet (it's quite a long drive), but I think the guy is talking about that framing that goes under the transmission, linking left and right sides of the frame, and to which control arms are bolted.
But is this framing really the cross-member ?
Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing a cross-member [700][1989]
posted by  NativeJesus  on Sun Jul 15 05:34 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.