Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

strut gland nut? possible to remove with strut on car? 200 1992

I am having a heck of a time trying to get the strut gland nut off. From the posts I have read, it looks like heat and a hammer/pipe wrench are the way to go. This seems like it would be very difficult to do on the car? I was hoping to avoid opening up the brake lines. If I do need to remove the strut, how should I do it? Undo the bolts holding the ball joint to the control arm and take it out with the ball joint? I was planning on replacing the ball joints anyways.

Thanks,
Kevin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New strut gland nut? possible to remove with strut on car? [200][1992]
posted by  cn52x5hg subscriber  on Sat Apr 28 12:42 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.