Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Knocking in front 200

posted by  Ickaruz on  Fri Apr 27 12:07 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 09:21 CST 2014
[RELATED]

My new issue. After replacing many parts I have a knocking in the left front. It may have started ages ago to a degree but is really bad now. I replaced the struts and springs as well as bushings on the stabilizer bar. Because of the noise I then did the front wheel bearings. Finally I did the ball joints. Still bad knocking. My theory is that the front strut mount (the rubber thingy at the top with a bearing inside) is spanked. I say this because when I popped the top off I can see major dry rot. I also shook the strut tower when the vehicle was raised and got some noise. Am I correct in my thinking? If so does it really matter if I order the Meyle for $45 from FCP or the cheaper URO? Appreciate all feedback to this new issue!
Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Knocking in front [200]
posted by  Ickaruz  on Fri Apr 27 12:07 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.