Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'90 240 DL wagon heat 200 1990

posted by  goformike on  Sun Apr 15 10:44 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 9 03:28 CST 2010
[RELATED]

I've read some of the posts here and I'm still not clear on something.
My '90 240 hot/cold slider is not very effective. I can get it to cut heat in the extreme cold position. However, any position off of far left results in what feels like full heat. There is no modulation at all. The other end of the cable does move the heater control valve. Will replacing the valve let me modulate the heat better or is this "the way they are"? It seems to me that if the cable moves the valve, I should be able to modulate the heat effectively. If a new valve is in order, do I want an "old" style or "new" style? From which vendor?

Thanks in advance,

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '90 240 DL wagon heat [200][1990]
posted by  goformike  on Sun Apr 15 10:44 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.