Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How much lift is required for 760 w/IRS exhaust replacement? 700 1988

posted by  TXMatti on  Mon Mar 26 01:37 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jun 22 07:58 CST 2010
[RELATED]

My front resonator has managed separate itself from the exhaust pipe, and is just hanging in there. I was looking at the system and it had a separate crossover section going over the rear axle. I was looking at pictures of replacement systems, and I understand that the resonator section is supposed to be one solid piece from the cat all the way over the rear axle.

How much ground clearance is required to slip that crossover pipe over the axle? Considering the length of the section + angle required... is this even possible to do with normal jackstands + chinese Craftsman 2ton basic jack?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How much lift is required for 760 w/IRS exhaust replacement? [700][1988]
posted by  TXMatti  on Mon Mar 26 01:37 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.